Product Description
The FS6000 control panel has a modular organization. One Line Driver Module is capable to drive 4 output lines. Each output line may be configured as an open Line or two output lines may be united in a closed Loop configuration. The maximum configuration is of 16 Lines or 8 Loops.
Each Line or Loop may contain a maximum of 127 address point (detectors or adapters). The system registers the condition of the addressable points – normal, fire condition or fault condition – and the conditions are displayed at the panel with specific combinations of LEDs. For each addressable point a text message displayed on the panel to determine the point’s exact location may be assigned (example Floor 5 Room12). The communication between the panel and the addressable points is provided by two wire line and uses a specialized protocol. Protection against false alarm is available by repeated check ups of the activated detectors. The electromagnetic interference is filtered by the means of control equipment and software. In Loop configurations power is supplied from both sides and in case of a short circuit the short circuited segment is cut off by the isolators. All conditions and common faults are indicated and registered by the panel. It is possible to include conventional fire detectors in the FS6000 system using the addressable adapter.
The addressable adapter allows for conventional detectors to be included in the FS6000 Fire Alarm System. Control, programming and signalization are carried out by the system’s front panel, supplied with LED indicators, liquid crystal display and a keypad. The language select option is user-friendly.
Downloads:
Configuration software for system 6000 – DOS
Service instruction for the staff of FS6000 system
Instruction for setup, control and programing of FS6000
