New products - Power supply FS5200P
Home > Products > New products
| |
| |
| Name: Power supply FS5200P |
| |
| Description: |
| |
The Power Supply Device FS 5200P is an autonomous power supply source of combined type with a backup battery and charging device. Its function is to provide continuous power supply for the evices in the signaling installations, fire alarm installations and automation of the fire alarm quipment. In the event of a Fault condition (no mains supply, discharged or disconnected backup attery, burnt fuse) it switches its relay output. For a light signaling of the various conditions are used reen and yellow LEDs located on the front panel.
The device is in compliance with the European Standard EN 54-4.
Technical data
|
Input voltage |
(187-253)V AC, 50 / 60 Hz |
|
Maximum installed capacity |
120 VA |
|
Output voltage |
(17-28)V DC |
|
Output current (in the presence of mains power supply) |
up to 3,5 A (continuous) |
|
Output current (in the absence of mains power supply and fully charged backup battery) |
3,5 A (up to 2 h)
|
|
Over-discharging protection below |
17V DC |
|
Output for Fault condition |
Relay |
|
|
potential free |
|
|
switching 1 A / 30V DC |
|
Backup battery |
2x12V DC / 7 Ah |
|
Dimensions |
330x305x80 mm |
|
Weight (excluding the backup battery) |
4,1 kg |
|
Operating temperature |
minus 5oC to 40oC |
|
Relative humidity |
(92±3)% at 40 oC |
|
Degree of protection |
IP 30 |
|
| |
 |
| |
| More information: |
| |
| Instruction manual FS5200P |  | | Catalog FS5200P | |
|
| |
|
New products
Module FD5301
Module RS-LAN
Fire Extinguishing Control Panel FS5200E
Remote control panel IFS7002R
Addressable sounder FD7204
|
Български 
Руский 
